Guide two
Vinyl & Turntables
Records reward a little care. Clean vinyl, a well set-up turntable and a healthy stylus mean less noise, less wear and more music.

The parts of a turntable
| Part | What it does |
|---|---|
| Platter and motor | Spin the record at a steady 33⅓ or 45 rpm. |
| Tonearm | Carries the cartridge across the record. |
| Cartridge and stylus | The stylus traces the groove; the cartridge turns its movement into a tiny electrical signal. |
| Phono stage | Boosts and equalises that signal for your amplifier. It may be built into the turntable or amplifier, or a separate box. |
Set-up basics
- Put the turntable on a level, stable surface, away from speakers and footfall vibration.
- Set the tracking force the cartridge maker recommends, using a stylus gauge if you can.
- Set anti-skate to match, following the turntable’s instructions.
Cleaning records

- Brush each side with a carbon-fibre brush before playing.
- For grubby records, use a proper record-cleaning fluid and a microfibre pad or cleaning machine.
- Let records dry fully before putting them back in clean inner sleeves.
Handling and storage
- Hold records by the edges and label only.
- Store them upright, not stacked flat, away from heat and sunlight.
- Replace paper inner sleeves with anti-static ones if they shed.
Stylus care
Brush the stylus gently from back to front with a soft stylus brush. Styli wear over time, so check the maker’s guidance on replacement and look for signs such as rising distortion or sibilance.